0xc00000e9 | How to fix the Windows error

If an error occurs in Windows, the system usually displays a somewhat cryptic error message with an error code consisting of an eight-digit hexadecimal identifier. However, these brief messages aren’t very helpful for many Microsoft Windows users because they don’t provide any information about the cause or possible strategies for resolving the issue. This article explains how to troubleshoot error code 0xc00000e9, which appears in the event of an unexpected input/output error on a drive.

Error 0xc00000e9 occurs either randomly while your system is running or only when reading and writing data to a specific drive. This error is serious when it occurs during the booting process, preventing Windows from starting.

To fix the error, you first need to find out which drive is affected. If this error always occurs on a specific drive, you can narrow down the troubleshooting process. For example, if you disconnect all external drives from your PC and everything runs smoothly afterward, then you’ll know that something must be wrong with one of your external drives.

Often, the error is caused by damaged or loose cable connections. Sometimes all you have to do is replace the USB cable of an external drive and the error will be resolved.

If you’re troubleshooting a built-in hard drive, shut down and unplug the computer, open it up, and check that the SATA cables are connected properly. These cables can loosen over time due to vibrations from the fan and hard drives. Another frequent problem is that contacts can corrode, causing connections to become unreliable. When in doubt, simply replace the SATA cables.

If error 0xc00000e9 only occurs when reading a specific CD or DVD, it usually means the disc is defective. In that case, all you can do is try to copy as much data as possible from the CD to the hard drive. A write-protected drive cannot be repaired.

1. If you have multiple hard drives, it’s not always easy to find the right one, because the Device Manager lists drives by their device name rather than their drive letter. If you double-click a disk drive, the drive letters on that disk are displayed on the “Volumes” tab in the next window. If this window is empty, click Populate to display the disk drive information.

You cannot use chkdsk to check your system’s main hard drive (in this case, C:) while Windows is running. You can press the Y key to automatically check the drive the next time you restart.

An error in your system’s main hard drive can cause Windows to stop booting in severe cases.

Often a weak BIOS battery or an incorrect BIOS setting is the only thing preventing Windows from booting. You can try troubleshooting this problem in two ways:

1. Before booting up, press the key displayed on the BIOS screen – usually F2 or Delete – to access the BIOS settings. Once there, you’ll see the option to reset BIOS to default settings, which is sufficient in most cases.
2. In some cases, it also helps to set the system hard drive as the default boot drive and disable the optional graphical boot menu to resolve issues such as error code 0xc00000e9.

If the BIOS is set correctly and the PC continues to display the 0xc00000e9 message when Windows starts, Windows System Repair can help. The Windows 10 boot loader includes advanced startup options that allow you to repair the operating system or recover your data:

1. Restart the computer and click Change defaults or choose other options on the first page of the boot loader.
2. Click “Choose other options” and click Troubleshoot in the next window. In the next menu, you can reset your PC to factory settings, if necessary.
3. Alternatively, you can choose Advanced Options for additional system repair options that can help to get a damaged Windows system back up and running.

For example, you can choose System Restore to restore your system to a previous state. To do this, you can select a system restore point that you previously created on your PC using Windows System Restore. This often corrects error 0xc00000e9 if file system errors were caused by a tune-up utility that was used improperly or by an application that crashed during a write operation, for example. If the boot sector on the hard drive is the reason Windows will not start (a very common reason, by the way), the Startup Repair option can be helpful.